Cisco Certified Network Associate (CCNA) Preparation Details
The CCNA 200-301 v1.1 exam validates your skills in network fundamentals, network access, IP connectivity, IP services, security fundamentals, and automation. This guide lists every official exam objective with Cisco documentation links to study each one. You can also explore more Cisco certification study guides on the Cisco Certification Study Guides to keep building your skills.
Cisco Certified Network Associate (CCNA) Materials
| Coursera | Cisco CCNA 200-301: The Complete Guide |
| Udemy | Cisco CCNA 200-301 V1.1 Complete Course with Real Labs |
| Whizlabs | Cisco Certified Network Associate (CCNA) |
20% 1.0 Network Fundamentals
1.1 Explain the role and function of network components
1.1.a Routers
What is a Router? – Definition and Uses
1.1.b Layer 2 and Layer 3 switches
Different Types of Network Switches
1.1.c Next-generation firewalls and IPS
NGFW vs traditional firewall: what’s different [Explained]
Configuring Cisco IOS Intrusion Prevention System
1.1.d Access points
Wireless Access Points Glossary of Terms
What Is Wi-Fi? – Definition and Types
1.1.e Controllers
What Is A WLAN Controller? – WLC
Cisco Catalyst Center 2.3.7 Data Sheet
Cisco Catalyst 9800 Series Wireless Controllers At-a-Glance
1.1.f Endpoints
Endpoint security: EPP + EDR to stop device threats [Overview]
What is a LAN? Local Area Network
1.1.g Servers
What Is Data Center Networking?
Cisco UCS C-Series Rack Servers
What Is a Virtual Machine (VM) and How It Works
1.1.h PoE
What Is Power over Ethernet (PoE)?
Configuring Power over Ethernet
Configuring Power over Ethernet
1.2 Describe characteristics of network topology architectures
1.2.a Two-tier
Borderless Campus 1.0 Design and Deployment Models
Campus LAN and Wireless LAN Solution Design Guide
1.2.b Three-tier
Borderless Campus 1.0 Design and Deployment Models
Campus LAN and Wireless LAN Solution Design Guide
1.2.c Spine-leaf
Managing and Monitoring VXLAN EVPN Fabrics Using Cisco Nexus Dashboard Fabric
Nondisruptive Data Center Network System Maintenance Best Practices with Cisco
What Is Data Center Networking?
1.2.d WAN
What is a WAN? – Wide-Area Network
What Is SD-WAN? – Software-Defined WAN (SDWAN)
What is the Difference Between SD-WAN and MPLS?
1.2.e Small office/home office (SOHO)
How to Set Up a Small Business Network
Networking Basics: What You Need To Know
What is a LAN? Local Area Network
1.2.f On-premises and cloud
What is Cloud Computing? – Cloud Computing Definition
1.3 Compare physical interface and cabling types
1.3.a Single-mode fiber, multimode fiber, copper
Connector and Cable Specifications
1.3.b Connections (Ethernet shared media and point-to-point)
Configure and Verify Ethernet 10/100/1000Mb Half/Full Duplex Auto-Negotiation
What is a LAN? Local Area Network
1.4 Identify interface and cable issues (collisions, errors, mismatch duplex, and/or speed)
Troubleshoot Switch Port and Interface Problems
Configure and Verify Ethernet 10/100/1000Mb Half/Full Duplex Auto-Negotiation
Troubleshoot LAN Switching Environments
1.5 Compare TCP to UDP
RFC 9293: Transmission Control Protocol (TCP)
RFC 768: User Datagram Protocol
1.6 Configure and verify IPv4 addressing and subnetting
RFC 4632: Classless Inter-domain Routing (CIDR): The Internet Address
RFC 3021: Using 31-Bit Prefixes on IPv4 Point-to-Point Links
Configure Subnet Zero and All-Ones Subnet
Configure IP Addresses and Unique Subnets for New Users
1.7 Describe private IPv4 addressing
RFC 1918: Address Allocation for Private Internets
RFC 6890: Special-Purpose IP Address Registries
1.8 Configure and verify IPv6 addressing and prefix
IPv6 Addressing and Basic Connectivity
RFC 8200: Internet Protocol, Version 6 (IPv6) Specification
RFC 4291: IP Version 6 Addressing Architecture
RFC 4862: IPv6 Stateless Address Autoconfiguration
1.9 Describe IPv6 address types
1.9.a Unicast (global, unique local, and link local)
RFC 4291: IP Version 6 Addressing Architecture
RFC 4193: Unique Local IPv6 Unicast Addresses
IPv6 Deployment Guide – IPv6 Basics
1.9.b Anycast
RFC 4291: IP Version 6 Addressing Architecture
IPv6 Deployment Guide – IPv6 Basics
1.9.c Multicast
RFC 4291: IP Version 6 Addressing Architecture
IPv6 Deployment Guide – IPv6 Basics
1.9.d Modified EUI 64
RFC 4291: IP Version 6 Addressing Architecture
IPv6 Addressing and Basic Connectivity
RFC 4862: IPv6 Stateless Address Autoconfiguration
1.10 Verify IP parameters for Client OS (Windows, Mac OS, Linux)
IPv6 Addressing and Basic Connectivity
1.11 Describe wireless principles
1.11.a Nonoverlapping Wi-Fi channels
Design Guide CX – Wireless for Large Public Networks
1.11.b SSID
Wireless Access Points Glossary of Terms
What Is Wi-Fi? – Definition and Types
1.11.c RF
Design Guide CX – Wireless for Large Public Networks
What Is Wi-Fi? – Definition and Types
1.11.d Encryption
1.12 Explain virtualization fundamentals (server virtualization, containers, and VRFs)
What Is a Virtual Machine (VM) and How It Works
Understand App Hosting on Catalyst 9000 Switches
1.13 Describe switching concepts
1.13.a MAC learning and aging
CDP, LLDP, MAC, and UDLD Configuration Guide – Configure MAC
Unicast Flooding in Switched Campus Networks
1.13.b Frame switching
Troubleshoot LAN Switching Environments
1.13.c Frame flooding
Unicast Flooding in Switched Campus Networks
CDP, LLDP, MAC, and UDLD Configuration Guide – Configure MAC
1.13.d MAC address table
CDP, LLDP, MAC, and UDLD Configuration Guide – Configure MAC
Unicast Flooding in Switched Campus Networks
20% 2.0 Network Access
2.1 Configure and verify VLANs (normal range) spanning multiple switches
2.1.a Access ports (data and voice)
VLAN Configuration Guide – Configure VLAN [Cisco IOS XE 17]
VLAN Configuration Guide – Configure Voice VLAN [Cisco IOS XE 17]
2.1.b Default VLAN
VLAN Configuration Guide – Configure VLAN [Cisco IOS XE 17]
2.1.c InterVLAN connectivity
Configure Inter-VLAN Routing with Catalyst Switches
Interface Characteristics Configuration Guide
VLAN Configuration Guide – Configure VLAN [Cisco IOS XE 17]
2.2 Configure and verify interswitch connectivity
2.2.a Trunk ports
VLAN Configuration Guide – Configure VLAN Trunking [Cisco IOS XE 17]
2.2.b 802.1Q
VLAN Configuration Guide – Configure VLAN Trunking [Cisco IOS XE 17]
2.2.c Native VLAN
VLAN Configuration Guide – Configure VLAN Trunking [Cisco IOS XE 17]
2.3 Configure and verify Layer 2 discovery protocols (Cisco Discovery Protocol and LLDP)
CDP, LLDP, MAC, and UDLD Configuration Guide – Feature History for CDP
CDP, LLDP, MAC, and UDLD Configuration Guide – Feature History for LLDP
Cisco Discovery Protocol Version 2
Configuring Cisco Discovery Protocol
2.4 Configure and verify (Layer 2/Layer 3) EtherChannel (LACP)
Etherchannel Configuration Guide – EtherChannel [Cisco IOS XE 17]
Etherchannel Configuration Guide – Etherchannels [Cisco IOS XE 17]
2.5 Interpret basic operations of Rapid PVST+ Spanning Tree Protocol
2.5.a Root port, root bridge (primary/secondary), and other port names
STP Configuration Guide – Spanning Tree Protocol [Cisco IOS XE 17]
Configuring Spanning Tree Protocol
2.5.b Port states and roles
STP Configuration Guide – Spanning Tree Protocol [Cisco IOS XE 17]
Configuring Spanning Tree Protocol
2.5.c PortFast
Configuring Optional Spanning-Tree Features
STP Configuration Guide – Spanning Tree Protocol [Cisco IOS XE 17]
2.5.d Root guard, loop guard, BPDU filter, and BPDU guard
Configuring Optional Spanning-Tree Features
Configuring Spanning Tree Protocol
2.6 Describe Cisco Wireless Architectures and AP modes
Embedded Wireless Controller on Catalyst Access Points (EWC) White Paper
Cisco Embedded Wireless Controller on Catalyst Access Points FAQ
Design Zone – Campus LAN and Wireless LAN Solution Design Guide
Products – Cisco Unified Wireless Network Solution Guide
Cisco Catalyst 9800 Series Configuration Best Practices
2.7 Describe physical infrastructure connections of WLAN components (AP, WLC, access/trunk ports, and LAG)
Review Wireless LAN Controller (WLC) Design and Features FAQ
Cisco Wireless LAN Controller (WLC) Configuration Best Practices
Wireless Automation with Cisco Catalyst Center (CVD)
Cisco Catalyst 9800 Series Configuration Best Practices
2.8 Describe network device management access (Telnet, SSH, HTTP, HTTPS, console, TACACS+/RADIUS, and cloud managed)
Cisco IOS XE Software Hardening Guide
Configure RADIUS & TACACS+ for GUI & CLI Auth on 9800 WLCs
Products – Cloud Monitoring for Catalyst FAQ
2.9 Interpret the wireless LAN GUI configuration for client connectivity, such as WLAN creation, security settings, QoS profiles, and advanced settings
Cisco Catalyst 9800 Series Configuration Best Practices
25% 3.0 IP Connectivity
3.1 Interpret the components of routing table
3.1.a Routing protocol code
Understand Administrative Distance
Configuring IP Routing Protocol-Independent Features
Configure a Gateway of Last Resort that Uses IP Commands
3.1.b Prefix
Configuring IP Routing Protocol-Independent Features
Configure Route Selection for Routers
3.1.c Network mask
Configuring IP Routing Protocol-Independent Features
Configure Route Selection for Routers
3.1.d Next hop
Configuring IP Routing Protocol-Independent Features
Configure Route Selection for Routers
IP Routing Configuration Guide, Cisco IOS XE 17.x – IPv6 Routing: Static Routing
3.1.e Administrative distance
Understand Administrative Distance
Adjust Administrative Distance for Route Selection in Cisco IOS Routers
Configure Route Selection for Routers
3.1.f Metric
Understand Administrative Distance
Configure Route Selection for Routers
Configuring IP Routing Protocol-Independent Features
3.1.g Gateway of last resort
Configure a Gateway of Last Resort that Uses IP Commands
Understand Administrative Distance
Configuring IP Routing Protocol-Independent Features
3.2 Determine how a router makes a forwarding decision by default
3.2.a Longest prefix match
Configure Route Selection for Routers
Understand Administrative Distance
3.2.b Administrative distance
Understand Administrative Distance
Configure Route Selection for Routers
Adjust Administrative Distance for Route Selection in Cisco IOS Routers
3.2.c Routing protocol metric
Configure Route Selection for Routers
Understand Administrative Distance
Configuring IP Routing Protocol-Independent Features
3.3 Configure and verify IPv4 and IPv6 static routing
3.3.a Default route
Configure a Gateway of Last Resort that Uses IP Commands
Configuring IP Routing Protocol-Independent Features
IP Routing Configuration Guide, Cisco IOS XE 17.x – IPv6 Routing: Static Routing
3.3.b Network route
Configuring IP Routing Protocol-Independent Features
IP Routing Configuration Guide, Cisco IOS XE 17.x – IPv6 Routing: Static Routing
Implement Static Routes for IPv6 Configuration Example
3.3.c Host route
Configuring IP Routing Protocol-Independent Features
IP Routing Configuration Guide, Cisco IOS XE 17.x – IPv6 Routing: Static Routing
Implement Static Routes for IPv6 Configuration Example
3.3.d Floating static
Adjust Administrative Distance for Route Selection in Cisco IOS Routers
IP Routing Configuration Guide, Cisco IOS XE 17.x – IPv6 Routing: Static Routing
Configuring IP Routing Protocol-Independent Features
Implement Static Routes for IPv6 Configuration Example
3.4 Configure and verify single area OSPFv2
3.4.a Neighbor adjacencies
Understand OSPF Neighbor States
OSPF Configuration Guide – OSPF [Cisco IOS XE 17]
IP Routing: OSPF Configuration Guide – Configuring OSPF
RFC 2328: STD 54: OSPF Version 2
3.4.b Point-to-point
What Does the show ip ospf interface Command Reveal
OSPF Configuration Guide – OSPF [Cisco IOS XE 17]
IP Routing: OSPF Configuration Guide – Configuring OSPF
RFC 2328: STD 54: OSPF Version 2
3.4.c Broadcast (DR/BDR selection)
What Does the show ip ospf interface Command Reveal
OSPF Configuration Guide – OSPF [Cisco IOS XE 17]
IP Routing: OSPF Configuration Guide – Configuring OSPF
RFC 2328: STD 54: OSPF Version 2
3.4.d Router ID
OSPF Configuration Guide – OSPF [Cisco IOS XE 17]
IP Routing: OSPF Configuration Guide – Configuring OSPF
RFC 2328: STD 54: OSPF Version 2
3.5 Describe the purpose, functions, and concepts of first hop redundancy protocols
FHRP Configuration Guide – HSRP [Cisco IOS XE 17]
FHRP Configuration Guide – VRRP [Cisco IOS XE 17]
Understand the Hot Standby Router Protocol Features and Functionality
RFC 2281: Cisco Hot Standby Router Protocol (HSRP)
RFC 9568: Virtual Router Redundancy Protocol (VRRP) Version 3 for IPv4 and IPv6
10% 4.0 IP Services
4.1 Configure and verify inside source NAT using static and pools
Configuring NAT for IP Address Conservation
Configuring NAT for IP Address Conservation
RFC 3022: Traditional IP Network Address Translator (Traditional NAT)
RFC 1918: Address Allocation for Private Internets
4.2 Configure and verify NTP operating in a client and server mode
NTP Configuration Guide – Network Time Protocol
RFC 5905: Network Time Protocol Version 4: Protocol and Algorithms Specification
4.3 Explain the role of DHCP and DNS within the network
RFC 2131: Dynamic Host Configuration Protocol
Configuring the Cisco IOS DHCP Server
RFC 1034: Domain names – concepts and facilities
RFC 1035: Domain names – implementation and specification
4.4 Explain the function of SNMP in network operations
RFC 3411: An Architecture for Describing Simple Network Management Protocol
RFC 3412: Message Processing and Dispatching for the Simple Network Management
RFC 3414: User-based Security Model (USM) for version 3 of the Simple Network
4.5 Describe the use of syslog features, including facilities and severity levels
RFC 3164: The BSD Syslog Protocol
4.6 Configure and verify DHCP client and relay
Configuring the Cisco IOS DHCP Relay Agent
Configuring the Cisco IOS XE DHCP Relay Agent
RFC 3046: DHCP Relay Agent Information Option
RFC 2131: Dynamic Host Configuration Protocol
4.7 Explain the forwarding per-hop behavior (PHB) for QoS such as classification, marking, queuing, congestion, policing, and shaping
Applying QoS Features Using the MQC
Quality of Service Configuration Guide – Quality of service
RFC 2474: Definition of the Differentiated Services Field (DS Field) in the
RFC 2597: Assured Forwarding PHB Group
RFC 3246: An Expedited Forwarding PHB (Per-Hop Behavior)
4.8 Configure network devices for remote access using SSH
Secure Shell Version 2 Support
RFC 4251: The Secure Shell (SSH) Protocol Architecture
RFC 4253: The Secure Shell (SSH) Transport Layer Protocol
4.9 Describe the capabilities and functions of TFTP/FTP in the network
RFC 1350: The TFTP Protocol (Revision 2)
RFC 959: File Transfer Protocol
Using the Cisco IOS Integrated File System
15% 5.0 Security Fundamentals
5.1 Define key security concepts (threats, vulnerabilities, exploits, and mitigation techniques)
Understanding Terminology in Cisco Security Advisories
An Introduction to Information Security
Guide for Conducting Risk Assessments
RFC 4949: Internet Security Glossary, Version 2
5.2 Describe security program elements (user awareness, training, and physical access control)
Building a Cybersecurity and Privacy Learning Program
Building an Information Technology Security Awareness and Training Program
Security and Privacy Controls for Information Systems and Organizations
5.3 Configure and verify device access control using local passwords
Configuring Security with Passwords, Privileges, and Logins
Controlling Switch Access with Passwords and Privilege Levels
5.4 Describe security password policy elements, such as management, complexity, and password alternatives (multifactor authentication, certificates, and biometrics)
Configuring Security with Passwords, Privileges, and Logins
Digital Identity Guidelines: Authentication and Authenticator Management
Configure Duo Multi-Factor Authentication for Remote Workers
5.5 Describe IPsec remote access and site-to-site VPNs
Configuring Security for VPNs with IPsec
IPsec Virtual Tunnel Interfaces
Configure a Site-to-Site IPSec IKEv1 Tunnel Between ASA and Cisco IOS XE Router
RFC 4301: Security Architecture for the Internet Protocol
5.6 Configure and verify access control lists
Creating an IP Access List and Applying It to an Interface
5.7 Configure and verify Layer 2 security features (DHCP snooping, dynamic ARP inspection, and port security)
Operate and Troubleshoot DHCP Snooping on Catalyst 9000 Switches
5.8 Compare authentication, authorization, and accounting concepts
RFC 2865: Remote Authentication Dial In User Service (RADIUS)
RFC 8907: The Terminal Access Controller Access-Control System Plus (TACACS+)
5.9 Describe wireless security protocols (WPA, WPA2, and WPA3)
Configure and Verify Wi-Fi 6E WLAN Layer 2 Security
5.10 Configure and verify WLAN within the GUI using WPA2 PSK
Cisco Catalyst 9800 Wireless Controller Series Web UI Deployment Guide
Configure and Verify Wi-Fi 6E WLAN Layer 2 Security
10% 6.0 Automation and Programmability
6.1 Explain how automation impacts network management
Automate Network Infrastructure using Network as Code
Cisco Catalyst Center Platform Overview
6.2 Compare traditional networks with controller-based networking
Cisco Software-Defined Access: Introducing an Entirely New Era in Networking
Catalyst Center and Cisco Software-Defined Access
Software-Defined Networking (SDN)
6.3 Describe controller-based, software defined architecture (overlay, underlay, and fabric)
6.3.a Separation of control plane and data plane
Software-Defined Networking (SDN)
RFC 7426: Software-Defined Networking (SDN): Layers and Architecture Terminology
Cisco Secure Network SD-Access Deployment Guide
6.3.b Northbound and Southbound APIs
Software-Defined Networking (SDN)
RFC 7426: Software-Defined Networking (SDN): Layers and Architecture Terminology
Cisco Catalyst Center Platform Overview
6.4 Explain AI (generative and predictive) and machine learning in network operations
What is Generative Artificial Intelligence (GenAI)?
AI and Machine Learning Primer: A Technology Overview for Business Decision
Introduction to AI & Machine Learning Part 1.
6.5 Describe characteristics of REST-based APIs (authentication types, CRUD, HTTP verbs, and data encoding)
RFC 7617: The ‘Basic’ HTTP Authentication Scheme
RFC 6749: The OAuth 2.0 Authorization Framework
RFC 6750: The OAuth 2.0 Authorization Framework: Bearer Token Usage
RFC 8259: The JavaScript Object Notation (JSON) Data Interchange Format
Understand and Use Catalyst Center APIs
6.6 Recognize the capabilities of configuration management mechanisms such as Ansible and Terraform
How Network Automation is Different
Overview – Configuration Language
6.7 Recognize components of JSON-encoded data
RFC 8259: The JavaScript Object Notation (JSON) Data Interchange Format
Wrapping Up Cisco Certified Network Associate (CCNA)
Working through every CCNA 200-301 objective and its documentation builds the networking skills the exam and the job expect. Practice the configurations in a lab, review the weaker domains, and you will be ready. You can also explore more Cisco certification study guides on the Cisco Certification Study Guides to keep building your skills. Have a question or tip? Leave a comment below.
Receive Updates on Cisco Certified Network Associate (CCNA) Exam
Want to be notified as soon as I post? Subscribe to the RSS feed / leave your email address in the subscribe section. Share the article to your social networks with the below links so it can benefit others.