CCNA Cybersecurity Preparation Details
The CCNA Cybersecurity 200-201 CCNACBR v1.2 exam (formerly CyberOps Associate) validates your skills in security concepts, security monitoring, host-based analysis, network intrusion analysis, and security policies. Every official objective below links to study documentation. You can also explore more Cisco certification study guides on the Cisco Certification Study Guides to keep building your skills.
CCNA Cybersecurity Materials
| Coursera | CCNA Cybersecurity (200-201) – Video Training Series |
| Udemy | 200-201 CBROPS: CyberOps Associate Exam Prep |
| Whizlabs | Cisco Certified Network Associate (CCNA) Cybersecurity |
20% 1.0 Security Concepts
1.1 Describe the CIA triad
FIPS 199, Standards for Security Categorization of Federal Information and
SP 800-12 Rev. 1, An Introduction to Information Security
1.2 Compare security deployments
1.2.a Network, endpoint, and application security systems
1.2.b Agentless and agent-based protections
Cisco Secure Endpoint (Formerly AMP for Endpoints)
What is cloud workload protection?
What Is XDR? – Extended Detection and Response
1.2.c Legacy antivirus and antimalware
SP 800-83 Rev. 1, Guide to Malware Incident Prevention and Handling for
What Is Malware? – Definition and Examples
1.2.d SIEM, SOAR, and log management
What Is SIEM? – Security Information and Event Management
SP 800-92, Guide to Computer Security Log Management
Sharing Lessons Learned with Practitioners
Cisco Security and Splunk SOAR
1.2.e Container and virtual environments
SP 800-190, Application Container Security Guide
SP 800-125, Guide to Security for Full Virtualization Technologies
What is cloud workload protection?
SP 800-204, Security Strategies for Microservices-based Application Systems
1.2.f Cloud security deployments
SP 800-144, Guidelines on Security and Privacy in Public Cloud Computing
SP 800-146, Cloud Computing Synopsis and Recommendations
Shared responsibility in the cloud
1.3 Describe security terms
1.3.a Threat intelligence (TI)
Cisco Talos Intelligence Group – Comprehensive Threat Intelligence
SP 800-150, Guide to Cyber Threat Information Sharing
Cyber Threat Intelligence – Glossary
1.3.b Threat hunting
What Is XDR? – Extended Detection and Response
1.3.c Malware analysis
Cisco Secure Malware Analytics (Threat Grid)
SP 800-83 Rev. 1, Guide to Malware Incident Prevention and Handling for
What Is Malware? – Definition and Examples
1.3.d Threat actor
1.3.e Run book automation (RBA)
Sharing Lessons Learned with Practitioners
Cisco Security and Splunk SOAR
Cisco XDR – Extended Detection and Response
SP 800-61 Rev. 2, Computer Security Incident Handling Guide
1.3.f Reverse engineering
SP 800-83 Rev. 1, Guide to Malware Incident Prevention and Handling for
Cisco Secure Malware Analytics (Threat Grid)
Cisco Talos Intelligence Group – Comprehensive Threat Intelligence
1.3.g Sliding window anomaly detection
Cisco Secure Network Analytics
Cisco Security Analytics White Paper
SP 800-94, Guide to Intrusion Detection and Prevention Systems (IDPS)
1.3.h Threat modeling
Microsoft Threat Modeling Tool overview
SP 800-154, Guide to Data-Centric System Threat Modeling
1.3.i DevSecOps
SP 800-218, Secure Software Development Framework (SSDF) Version 1.1
1.4 Compare security concepts
1.4.a Risk (risk scoring/risk weighting, risk reduction, risk assessment)
SP 800-30 Rev. 1, Guide for Conducting Risk Assessments
SP 800-55 Rev. 1, Performance Measurement Guide for Information Security
1.4.b Threat
SP 800-30 Rev. 1, Guide for Conducting Risk Assessments
Tactics – Enterprise | MITRE ATT&CK
1.4.c Vulnerability
What is Vulnerability Management?
NVD – Vulnerability Detail Pages
SP 800-40 Rev. 4, Guide to Enterprise Patch Management Planning
1.4.d Exploit
Known Exploited Vulnerabilities Catalog
Tactics – Enterprise | MITRE ATT&CK
1.5 Describe the principles of the defense-in-depth strategy
SP 800-160 Vol. 2 Rev. 1, Developing Cyber-Resilient Systems
Network segmentation: macro vs microsegmentation
1.6 Compare access control models
1.6.a Discretionary access control
discretionary access control (DAC) – Glossary
SP 800-53 Rev. 5, Security and Privacy Controls for Information Systems and
1.6.b Mandatory access control
mandatory access control (MAC) – Glossary
SP 800-53 Rev. 5, Security and Privacy Controls for Information Systems and
1.6.c Nondiscretionary access control
SP 800-53 Rev. 5, Security and Privacy Controls for Information Systems and
1.6.d Authentication, authorization, accounting
1.6.e Rule-based access control
SP 800-53 Rev. 5, Security and Privacy Controls for Information Systems and
1.6.f Time-based access control
SP 800-53 Rev. 5, Security and Privacy Controls for Information Systems and
1.6.g Role-based access control
role-based access control (RBAC) – Glossary
SP 800-162, Guide to Attribute Based Access Control (ABAC) Definition and
1.6.h Attribute-based access control
SP 800-162, Guide to Attribute Based Access Control (ABAC) Definition and
attribute-based access control (ABAC) – Glossary
SP 800-207, Zero Trust Architecture
1.7 Describe terms as defined in CVSS
1.7.a Attack vector
CVSS v3.1 Specification Document
1.7.b Attack complexity
CVSS v3.1 Specification Document
1.7.c Privileges required
CVSS v3.1 Specification Document
1.7.d User interaction
CVSS v3.1 Specification Document
1.7.e Scope
CVSS v3.1 Specification Document
1.7.f Temporal metrics
CVSS v3.1 Specification Document
1.7.g Environmental metrics
CVSS v3.1 Specification Document
1.8 Identify the challenges of data visibility (network, host, and cloud) in detection
SP 800-137, Information Security Continuous Monitoring (ISCM) for Federal
SP 800-92, Guide to Computer Security Log Management
Cisco Security Analytics White Paper
1.9 Identify potential data loss from traffic profiles
What is data loss prevention (DLP)?
data loss prevention – Glossary
RFC 7011: Specification of the IP Flow Information Export (IPFIX) Protocol
1.10 Interpret the 5-tuple approach to isolate a compromised host in a grouped set of logs
RFC 7011: Specification of the IP Flow Information Export (IPFIX) Protocol
RFC 3954: Cisco Systems NetFlow Services Export Version 9
1.11 Compare rule-based detection vs. behavioral and statistical detection
SP 800-94, Guide to Intrusion Detection and Prevention Systems (IDPS)
Cisco Security Analytics White Paper
Cisco Secure Network Analytics
25% 2.0 Security Monitoring
2.1 Compare attack surface and vulnerability
Attack Surface Analysis Cheat Sheet
2.2 Identify the types of data provided by these technologies
2.2.a TCP dump
Chapter 4. Capturing Live Network Data
2.2.b NetFlow
RFC 3954: Cisco Systems NetFlow Services Export Version 9
RFC 7011: Specification of the IPFIX Protocol
2.2.c Next-gen firewall
What is a next-generation firewall (NGFW)?
Connection and Security Intelligence Events
2.2.d Traditional stateful firewall
SP 800-41 Rev. 1, Guidelines on Firewalls and Firewall Policy
What is a next-generation firewall (NGFW)?
2.2.e Application visibility and control
Application Visibility and Control
Cisco Application Visibility and Control User Guide – Technology Overview
2.2.f Web content filtering
2.2.g Email content filtering
Using Message Filters to Enforce Email Policies
User Guide for AsyncOS 15.0 for Cisco Secure Email Gateway
Cisco Secure Email Threat Defense
2.3 Describe the impact of these technologies on data visibility
2.3.a Access control list
SP 800-41 Rev. 1, Guidelines on Firewalls and Firewall Policy
2.3.b NAT/PAT
RFC 3022: Traditional IP Network Address Translator (Traditional NAT)
RFC 2663: IP Network Address Translator (NAT) Terminology and Considerations
Configuring NAT for IP Address Conservation
2.3.c Tunneling
RFC 4301: Security Architecture for the Internet Protocol
RFC 2784: Generic Routing Encapsulation (GRE)
RFC 4459: MTU and Fragmentation Issues with In-the-Network Tunneling
2.3.d TOR
2.3.e Encryption
RFC 8446: The Transport Layer Security (TLS) Protocol Version 1.3
SP 800-175B Rev. 1, Guideline for Using Cryptographic Standards
2.3.f P2P
RFC 5694: Peer-to-Peer (P2P) Architecture: Definition, Taxonomies, Examples
RFC 3234: Middleboxes: Taxonomy and Issues
2.3.g Encapsulation
RFC 2784: Generic Routing Encapsulation (GRE)
RFC 2661: Layer Two Tunneling Protocol “L2TP”
RFC 4459: MTU and Fragmentation Issues with In-the-Network Tunneling
2.3.h Load balancing
RFC 2991: Multipath Issues in Unicast and Multicast Next-Hop Selection
2.4 Describe the uses of these data types in security monitoring
2.4.a Full packet capture
Chapter 4. Capturing Live Network Data
SP 800-94, Guide to Intrusion Detection and Prevention Systems (IDPS)
SP 800-86, Guide to Integrating Forensic Techniques into Incident Response
2.4.b Session data
RFC 7011: Specification of the IPFIX Protocol
RFC 3954: Cisco Systems NetFlow Services Export Version 9
2.4.c Transaction data
Connection and Security Intelligence Events
RFC 7011: Specification of the IPFIX Protocol
2.4.d Statistical data
SP 800-137, Information Security Continuous Monitoring
SP 800-94, Guide to Intrusion Detection and Prevention Systems (IDPS)
2.4.e Metadata
RFC 7011: Specification of the IPFIX Protocol
SP 800-92, Guide to Computer Security Log Management
Connection and Security Intelligence Events
2.4.f Alert data
SP 800-94, Guide to Intrusion Detection and Prevention Systems (IDPS)
SP 800-92, Guide to Computer Security Log Management
SP 800-61 Rev. 2, Computer Security Incident Handling Guide
2.5 Describe network attacks, such as protocol-based, denial of service, distributed denial of service, and man-in-the-middle
RFC 4987: TCP SYN Flooding Attacks and Common Mitigations
Understanding Denial-of-Service Attacks
Manipulator-in-the-Middle attack
2.6 Describe web application attacks, such as SQL injection, command injections, and cross- site scripting
A03 Injection – OWASP Top 10:2021
2.7 Describe social engineering attacks (manual and generative AI)
What Is Phishing? Examples and Phishing Quiz
AI 100-2 E2025, Adversarial Machine Learning
2.8 Describe endpoint-based attacks, such as buffer overflows, command and control (C2), malware, and ransomware
CWE-120: Buffer Copy without Checking Size of Input
SP 800-83 Rev. 1, Guide to Malware Incident Prevention and Handling
2.9 Describe evasion and obfuscation techniques, such as tunneling, encryption, and proxies
Obfuscated Files or Information
2.10 Describe the impact of certificates on security (includes PKI, public/private crossing the network, asymmetric/symmetric)
public key infrastructure (PKI)
RFC 5280: Internet X.509 Public Key Infrastructure Certificate and CRL Profile
SP 800-57 Part 1 Rev. 5, Recommendation for Key Management
SP 800-175B Rev. 1, Guideline for Using Cryptographic Standards
SP 800-52 Rev. 2, Guidelines for the Selection, Configuration, and Use of TLS
2.11 Identify the certificate components in a given scenario
2.11.a Cipher-suite
RFC 9325: Recommendations for Secure Use of TLS and DTLS
SP 800-52 Rev. 2, Guidelines for the Selection, Configuration, and Use of TLS
RFC 8446: The Transport Layer Security (TLS) Protocol Version 1.3
2.11.b X.509 certificates
RFC 5280: Internet X.509 Public Key Infrastructure Certificate and CRL Profile
SP 800-52 Rev. 2, Guidelines for the Selection, Configuration, and Use of TLS
public key infrastructure (PKI)
2.11.c Key exchange
SP 800-56A Rev. 3, Recommendation for Pair-Wise Key-Establishment Schemes
RFC 7919: Negotiated Finite Field DH Ephemeral Parameters for TLS
RFC 8446: The Transport Layer Security (TLS) Protocol Version 1.3
2.11.d Protocol version
RFC 8996: Deprecating TLS 1.0 and TLS 1.1
RFC 8446: The Transport Layer Security (TLS) Protocol Version 1.3
RFC 5246: The Transport Layer Security (TLS) Protocol Version 1.2
SP 800-52 Rev. 2, Guidelines for the Selection, Configuration, and Use of TLS
2.11.e PKCS
RFC 8017: PKCS #1: RSA Cryptography Specifications Version 2.2
RFC 2986: PKCS #10: Certification Request Syntax Specification Version 1.7
RFC 7292: PKCS #12: Personal Information Exchange Syntax v1.1
RFC 5958: Asymmetric Key Packages
20% 3.0 Host-Based Analysis
3.1 Describe the functionality of these endpoint technologies in regard to security monitoring utilizing rules, signatures, and predictive AI
3.1.a Host-based intrusion detection
Guide to Intrusion Detection and Prevention Systems (IDPS)
Secure Endpoint Best Practices Guide
3.1.b Antimalware and antivirus
Microsoft Defender Antivirus in Windows Overview
Guide to Malware Incident Prevention and Handling for Desktops and Laptops
Secure Endpoint Best Practices Guide
Endpoint security: EPP + EDR to stop device threats [Overview]
3.1.c Host-based firewall
Documentation about the netfilter/iptables project
3.2 Identify components of an operating system (such as Windows and Linux) in a given scenario
3.3 Describe the role of attribution in an investigation
3.3.a Assets
Computer Security Incident Handling Guide
3.3.b Threat actor
Guide to Cyber Threat Information Sharing
3.3.c Indicators of compromise
Guide to Cyber Threat Information Sharing
Computer Security Incident Handling Guide
3.3.d Indicators of attack
Techniques – Enterprise | MITRE ATT&CK
Guide to Cyber Threat Information Sharing
3.3.e Chain of custody
RFC 3227: Guidelines for Evidence Collection and Archiving
Guide to Integrating Forensic Techniques into Incident Response
3.4 Identify type of evidence used based on provided logs
3.4.a Best evidence
RFC 3227: Guidelines for Evidence Collection and Archiving
Guide to Integrating Forensic Techniques into Incident Response
3.4.b Corroborative evidence
Guide to Integrating Forensic Techniques into Incident Response
Guide to Computer Security Log Management
RFC 3227: Guidelines for Evidence Collection and Archiving
3.4.c Indirect evidence
Guide to Integrating Forensic Techniques into Incident Response
Guide to Computer Security Log Management
Computer Security Incident Handling Guide
3.5 Interpret operating system, SIEM, SOAR platform, application, or command line logs to identify an event
Guide to Computer Security Log Management
3.6 Interpret the output report of malware analysis tools such as a detonation chamber or sandbox
Cisco Secure Malware Analytics (Threat Grid)
Unified Malware Analysis and Threat Intelligence At-a-Glance
3.7.a Hashes
FIPS 180-4, Secure Hash Standard (SHS)
File/Malware Events and Network File Trajectory
3.7.b URLs
RFC 3986: Uniform Resource Identifier (URI): Generic Syntax
IP and Domain Intelligence Center
3.7.c Systems, events, and networking
Unified Malware Analysis and Threat Intelligence At-a-Glance
20% 4.0 Network Intrusion Analysis
4.1 Map the provided events to source technologies
4.1.a IDS/IPS
Guide to Intrusion Detection and Prevention Systems (IDPS)
The Basics – Snort 3 Rule Writing Guide
4.1.b Firewall
Clarify FTD Access Control Policy Rule Actions
4.1.c Network application control
Cisco Application Visibility and Control (AVC)
Configure and Verify Netflow, AVC, and ETA on Catalyst 9000 Series Switches
4.1.d Proxy logs
What is the difference between transparent and forward proxy mode?
4.1.e Antivirus
Secure Endpoint Best Practices Guide
File/Malware Events and Network File Trajectory
Guide to Malware Incident Prevention and Handling for Desktops and Laptops
4.1.f Transaction data (NetFlow)
RFC 3954: Cisco Systems NetFlow Services Export Version 9
RFC 7011: Specification of the IP Flow Information Export (IPFIX) Protocol
Cisco Secure Network Analytics (formerly Stealthwatch) Data Sheet
4.2 Compare impact and no impact for these items
4.2.a False positive
Guide to Intrusion Detection and Prevention Systems (IDPS)
Computer Security Incident Handling Guide
4.2.b False negative
Guide to Intrusion Detection and Prevention Systems (IDPS)
Computer Security Incident Handling Guide
4.2.c True positive
Guide to Intrusion Detection and Prevention Systems (IDPS)
Computer Security Incident Handling Guide
4.2.d True negative
Guide to Intrusion Detection and Prevention Systems (IDPS)
Computer Security Incident Handling Guide
4.2.e Benign
Guide to Intrusion Detection and Prevention Systems (IDPS)
Computer Security Incident Handling Guide
Technical Guide to Information Security Testing and Assessment
4.3 Compare deep packet inspection with packet filtering and stateful firewall operation
NGFW vs traditional firewall: what’s different [Explained]
4.4 Compare inline traffic interrogation and taps or traffic monitoring
Inline Sets and Passive Interfaces
Configure Catalyst Switched Port Analyzer (SPAN): Example
Guide to Intrusion Detection and Prevention Systems (IDPS)
4.5 Compare the characteristics of data obtained from taps or traffic monitoring and transactional data (NetFlow) in the analysis of network traffic
Inline Sets and Passive Interfaces
Cisco Secure Network Analytics (formerly Stealthwatch) Data Sheet
RFC 7011: Specification of the IP Flow Information Export (IPFIX) Protocol
4.6 Extract files from a TCP stream when given a PCAP file and Wireshark
7.2. Following Protocol Streams
4.7 Identify key elements in an intrusion from a given PCAP file
4.7.a Source address
Display Filter Reference: Internet Protocol Version 4
4.7.b Destination address
Display Filter Reference: Internet Protocol Version 6
4.7.c Source port
Display Filter Reference: Transmission Control Protocol
Display Filter Reference: User Datagram Protocol
4.7.d Destination port
Display Filter Reference: Transmission Control Protocol
Display Filter Reference: User Datagram Protocol
4.7.e Protocols
6.4. Building Display Filter Expressions
Display Filter Reference: Index
4.7.f Payloads
7.2. Following Protocol Streams
4.8 Interpret the fields in protocol headers as related to intrusion analysis
4.8.a Ethernet frame
Display Filter Reference: Ethernet
4.8.b IPv4
Display Filter Reference: Internet Protocol Version 4
4.8.c IPv6
RFC 8200: Internet Protocol, Version 6 (IPv6) Specification
Display Filter Reference: Internet Protocol Version 6
4.8.d TCP
RFC 793: Transmission Control Protocol
Display Filter Reference: Transmission Control Protocol
4.8.e UDP
RFC 768: User Datagram Protocol
Display Filter Reference: User Datagram Protocol
4.8.f ICMP
RFC 792: Internet Control Message Protocol
RFC 4443: Internet Control Message Protocol (ICMPv6)
Display Filter Reference: Internet Control Message Protocol
4.8.g DNS
RFC 1035: Domain names – implementation and specification
Display Filter Reference: Domain Name System
4.8.h SMTP/POP3/IMAP
RFC 5321: Simple Mail Transfer Protocol
RFC 1939: Post Office Protocol – Version 3
RFC 3501: INTERNET MESSAGE ACCESS PROTOCOL – VERSION 4rev1
Display Filter Reference: Simple Mail Transfer Protocol
4.8.i HTTP/HTTPS/HTTP2
Display Filter Reference: Hypertext Transfer Protocol
Display Filter Reference: HyperText Transfer Protocol 2
4.8.j ARP
RFC 826: An Ethernet Address Resolution Protocol
Display Filter Reference: Address Resolution Protocol
4.9 Interpret common artifact elements from an event to identify an alert
4.9.a IP address (source / destination)
Display Filter Reference: Internet Protocol Version 4
4.9.b Client and server port identity
Display Filter Reference: Transmission Control Protocol
Display Filter Reference: User Datagram Protocol
4.9.c Process (file or registry)
4.9.d System (API calls)
Programming reference for the Win32 API
4.9.e Hashes
FIPS 180-4, Secure Hash Standard (SHS)
File/Malware Events and Network File Trajectory
4.9.f URI / URL
RFC 3986: Uniform Resource Identifier (URI): Generic Syntax
IP and Domain Intelligence Center
4.10 Interpret basic regular expressions
Regular Expression Language – Quick Reference
The Basics – Snort 3 Rule Writing Guide
15% 5.0 Security Policies and Procedures
5.1 Describe management concepts
5.1.a Asset management
SP 1800-5, IT Asset Management
SP 800-53 Rev. 5, Security and Privacy Controls for Information Systems
SP 800-137, Information Security Continuous Monitoring (ISCM)
What is Configuration Manager?
5.1.b Configuration management
SP 800-128, Guide for Security-Focused Configuration Management
configuration management – Glossary
What is Configuration Manager?
Device compliance policies in Microsoft Intune
5.1.c Mobile device management
SP 800-124 Rev. 2, Guidelines for Managing the Security of Mobile Devices
App Protection Policies Overview
Mobile Device Management in the Meraki Cloud
5.1.d Patch management
SP 800-40 Rev. 4, Guide to Enterprise Patch Management Planning
Windows Update Management Overview
Introduction to software updates – Configuration Manager
5.1.e Vulnerability management
SP 800-30 Rev. 1, Guide for Conducting Risk Assessments
Known Exploited Vulnerabilities Catalog
Microsoft Defender Vulnerability Management
Risk Triage for Security Vulnerability Announcements
5.2 Describe the elements in an incident response plan as stated in NIST.SP800-61
SP 800-61 Rev. 2, Computer Security Incident Handling Guide
SP 800-61 Rev. 3, Incident Response Recommendations and Considerations
Federal Government Cybersecurity Incident and Vulnerability Response Playbooks
5.3 Apply the incident handling process such as NIST.SP800-61 to an event
SP 800-61 Rev. 2, Computer Security Incident Handling Guide
SP 800-61 Rev. 3, Incident Response Recommendations and Considerations
Federal Government Cybersecurity Incident and Vulnerability Response Playbooks
5.4 Map elements to these steps of analysis based on the NIST.SP800-61
5.4.a Preparation
SP 800-61 Rev. 2, Computer Security Incident Handling Guide
SP 800-61 Rev. 3, Incident Response Recommendations and Considerations
Federal Government Cybersecurity Incident and Vulnerability Response Playbooks
5.4.b Detection and analysis
SP 800-61 Rev. 2, Computer Security Incident Handling Guide
SP 800-94, Guide to Intrusion Detection and Prevention Systems (IDPS)
SP 800-92, Guide to Computer Security Log Management
Federal Government Cybersecurity Incident and Vulnerability Response Playbooks
5.4.c Containment, eradication, and recovery
SP 800-61 Rev. 2, Computer Security Incident Handling Guide
SP 800-61 Rev. 3, Incident Response Recommendations and Considerations
Federal Government Cybersecurity Incident and Vulnerability Response Playbooks
5.4.d Post-incident analysis (lessons learned)
SP 800-61 Rev. 2, Computer Security Incident Handling Guide
SP 800-61 Rev. 3, Incident Response Recommendations and Considerations
SP 800-55 Vol. 1, Measurement Guide for Information Security: Volume 1
5.5 Map the organization stakeholders against the NIST IR categories (CMMC, NIST.SP800- 61)
5.5.a Preparation
SP 800-61 Rev. 2, Computer Security Incident Handling Guide
SP 800-171 Rev. 3, Protecting Controlled Unclassified Information
Safeguarding Covered Defense Information and Cyber Incident Reporting
5.5.b Detection and analysis
SP 800-61 Rev. 2, Computer Security Incident Handling Guide
SP 800-61 Rev. 3, Incident Response Recommendations and Considerations
Federal Government Cybersecurity Incident and Vulnerability Response Playbooks
5.5.c Containment, eradication, and recovery
SP 800-61 Rev. 2, Computer Security Incident Handling Guide
SP 800-171 Rev. 3, Protecting Controlled Unclassified Information
Federal Government Cybersecurity Incident and Vulnerability Response Playbooks
5.5.d Post-incident analysis (lessons learned)
SP 800-61 Rev. 2, Computer Security Incident Handling Guide
SP 800-61 Rev. 3, Incident Response Recommendations and Considerations
Safeguarding Covered Defense Information and Cyber Incident Reporting
5.6 Describe concepts as documented in NIST.SP800-86
5.6.a Evidence collection order
SP 800-86, Guide to Integrating Forensic Techniques into Incident Response
RFC 3227: Guidelines for Evidence Collection and Archiving
5.6.b Data integrity
SP 800-86, Guide to Integrating Forensic Techniques into Incident Response
FIPS 180-4, Secure Hash Standard (SHS)
Computer Forensics Tool Testing Program (CFTT)
5.6.c Data preservation
SP 800-86, Guide to Integrating Forensic Techniques into Incident Response
RFC 3227: Guidelines for Evidence Collection and Archiving
5.6.d Volatile data collection
SP 800-86, Guide to Integrating Forensic Techniques into Incident Response
RFC 3227: Guidelines for Evidence Collection and Archiving
Computer Forensics Tool Testing Program (CFTT)
5.7 Identify these elements used for network profiling
5.7.a Total throughput
Cisco IOS XE 17 – Flexible NetFlow
Cisco Secure Network Analytics
SP 800-94, Guide to Intrusion Detection and Prevention Systems (IDPS)
5.7.b Session duration
Cisco IOS XE 17 – Flexible NetFlow
Cisco Secure Network Analytics
SP 800-94, Guide to Intrusion Detection and Prevention Systems (IDPS)
5.7.c Ports used
Cisco IOS XE 17 – Flexible NetFlow
Cisco Secure Network Analytics
Get-NetTCPConnection (NetTCPIP)
SP 800-94, Guide to Intrusion Detection and Prevention Systems (IDPS)
5.7.d Critical asset address space
Cisco Secure Network Analytics
SP 800-137, Information Security Continuous Monitoring (ISCM)
SP 800-94, Guide to Intrusion Detection and Prevention Systems (IDPS)
5.8 Identify these elements used for server profiling
5.8.a Listening ports
Get-NetTCPConnection (NetTCPIP)
5.8.b Logged in users/service accounts
5.8.c Running processes
Get-Process (Microsoft.PowerShell.Management) – PowerShell
5.8.d Running tasks
Get-ScheduledTask (ScheduledTasks)
5.8.e Applications
Get-Service (Microsoft.PowerShell.Management) – PowerShell
SP 800-137, Information Security Continuous Monitoring (ISCM)
Microsoft Defender Vulnerability Management
5.9 Identify protected data in a network
5.9.a PII
Guide to Protecting the Confidentiality of Personally Identifiable Information
personally identifiable information – Glossary
Learn about sensitive information types
5.9.b PSI
sensitive information – Glossary
SP 800-171 Rev. 3, Protecting Controlled Unclassified Information
About Controlled Unclassified Information (CUI)
Microsoft Purview classifiers overview
5.9.c PHI
Implementing the HIPAA Security Rule: A Cybersecurity Resource Guide
Protected Health Information (PHI) – Glossary
Learn about sensitive information types
5.9.d Intellectual property
intellectual property – Glossary
SP 800-171 Rev. 3, Protecting Controlled Unclassified Information
Microsoft Purview classifiers overview
5.10 Classify intrusion events into categories as defined by security models, such as Cyber Kill Chain Model and Diamond Model of Intrusion
SP 800-150, Guide to Cyber Threat Information Sharing
5.11 Describe the relationship of SOC metrics to scope analysis (time to detect, time to contain, time to respond, time to control)
SP 800-55 Vol. 1, Measurement Guide for Information Security: Volume 1
SP 800-61 Rev. 3, Incident Response Recommendations and Considerations
SP 800-61 Rev. 2, Computer Security Incident Handling Guide
SP 800-137, Information Security Continuous Monitoring (ISCM)
Wrapping Up CCNA Cybersecurity
Working through every CCNA Cybersecurity 200-201 CCNACBR objective and its documentation builds the SOC analyst skills the exam and the job expect. Practice with real logs and packet captures, review the weaker domains, and you will be ready. You can also explore more Cisco certification study guides on the Cisco Certification Study Guides to keep building your skills. Have a question or tip? Leave a comment below.
Receive Updates on CCNA Cybersecurity Exam
Want to be notified as soon as I post? Subscribe to the RSS feed / leave your email address in the subscribe section. Share the article to your social networks with the below links so it can benefit others.